Teledyne CEMS & Fenceline

T100H - SO₂

0-10 ppm / 0-5,000 ppm

The T100H Sulphur Dioxide monitor uses the ultraviolet fluorescence measurement principle. It offers exceptional measurement stability with a user-friendly interface via a front panel touch screen.

T200H - NO_X

0-50 ppb / 0-20 ppm

The T200H model for the measurement of nitrogen oxides uses the chemiluminescence measurement technique. The autozero system provides exceptional stability by correcting any drift in real time with a user-friendly interface via a front panel touch screen.

T300M - CO

0-5 ppm / 0-5,000 ppm

The T300M measures CO at low to medium concentrations using the infrared energy absorbed by the sample gas according to the Lamber-Beer law. It uses a gas correlation filter and a high energy infrared source.

T360M - CO₂

0-4 ppm / 0-4,000 ppm

The T360M measures carbon dioxide by comparing the infrared energy absorbed by a sample with that absorbed by a reference gas according to the Beer-Lambert law. Using a gas filter correlation wheel, a high energy IR light source is passed alternately through a chamber filled with CO2 and a chamber without CO2.

N100H - SO₂

0-10 ppm / 0-5,000 ppm

The N100H (including NumaViewTM software) for SO2 measurement uses the ultraviolet fluorescence measurement principle. The functions and controls of the instrument are managed by a series of microprocessor controlled integrated modules using a simple and reliable CAN bus communication architecture. Each module is independently assembled and calibrated, allowing easy and quick field replacement to maximise instrument uptime.

N200H - NO_X,NO, NO₂

0-5 ppm / 0-5,000 ppm

The N200H (including NumaViewTM software) measures NO, NO2, NOx by chemiluminescence. The instrument's reaction cell uses a diffusion-based inlet nozzle to minimise the build-up of contamination on the optics, reducing the frequency of maintenance and minimising drift by improving stability. The result is sensitive, accurate and reliable performance under the harshest operating conditions.

N300M - CO

0-5 ppm / 0-5,000 ppm

The N300M (including NumaViewTM software) is a microprocessor-controlled analyzer designed to determine the concentration of CO in a gas sample. The instrument's functions and controls are managed by a series of microprocessor-controlled embedded modules using a simple and reliable CAN bus communication architecture. Each module is independently assembled and calibrated, allowing quick and easy field replacement to maximise instrument uptime.

N360M - CO₂

0-4 ppm / 0-4000 ppm

El modelo N360M (incluye el Software NumaViewTM) mide CO2 comparando la energía IR absorbida por una muestra con la absorbida por un gas de referencia. Se utiliza una correlación de filtros de gas para superar las interferencias y una fuente de energía IR. Cuenta con un sistema de purga de nitrógeno para eliminar los efectos del CO2 ambiental.

T700 Multigas Calibrator

SO₂, H₂S, NO, NO₂, CO, O₃ and others

The T700 is a microprocessor based calibrator for precision gas analysers. It incorporates high precision thermal mass flow controllers (multiple ranges available). It has up to four independent gas inputs. Optional internal integration of UV ozone generator, UV photometer and GPT (NO2) chamber. Multiple calibration sequences are programmable.

T700U Multigas Trace Level Calibrator

SO₂, H₂S, NO, NO₂, CO, O₃ and others

The T700U is a high accuracy calibrator for trace gas analysers. It is suitable for calibrating and verifying linearity at NO2 levels below 50 ppb. The Model T700U Ozone Generator operates on two ranges, high and low, to produce accurate ozone levels down to 3 ppb. The ozone concentration is measured prior to performing a GTP and has the ability to program multiple calibration sequences.

T703 Calibrator

Ozone - O₃

The T703 is an ozone calibrator with photometer and ozone generator. It provides concentrations from 50 ppb to 5 ppm at flow rates from 1 LPM to 5 LPM. Multiple calibration sequences are programmable.

T703U Calibrator

Ozone - O₃

The T703U is an ultra-low range ozone calibrator with photometer and ozone generator. Low range ozone generator capable of producing ozone levels down to 3 ppb. Multiple calibration sequences are programmable.

T750 Portable Calibrator

SO₂, H₂S, NO, NO₂, CO, O₃ and others

Microprocessor based portable calibrator for precision gas analysers providing calibration standards for multi-point span and zero calibrations. Optional internal integration of UV ozone generator, UV photometer and GPT (NO2) chamber. Multiple calibration sequences are programmable. Housed in a high density moulded travel case with integral handle and wheels for durability and ease of use. Incorporates a colour touch screen.

T750U Portable Calibrator

SO₂, H₂S, NO, NO₂, CO, O₃ and others

High accuracy microprocessor based portable calibrator for trace gas analysers. The ability to calibrate and verify linearity for NO2 levels below 5 ppb is difficult with standard calibrators. To overcome this limitation, this instrument can operate in two modes: low-high range or "fractional" mode to produce accurate ozone levels down to 3 ppb. Housed in a high density moulded travel case with integral handle and wheels for durability and ease of use. Incorporates a colour touch screen.

T753U Portable Calibrator

Ozone - O₃

Precision microprocessor based portable calibrator for ozone gas instruments and sensors. Using a sophisticated ozone generation system, combined with a sensitive photometer and pneumatic design, it produces stable and reliable ozone concentrations. Two modes are available: low/high range mode or fractional mode to produce accurate ozone levels down to 2 ppb. Housed in a high density moulded travel case with integral handle and wheels for durability and ease of use. Incorporates a colour touch screen.

T701

18 LPM a 30 PSI

It is a continuous source of clean air for calibrators that can also be used as a source of air in permeation tubes and air for FID analyzers. The regenerative dryer can produce dew points up to -20°C. It has CO and hydrocarbon eliminators. Its Modbus TCP/IP output allows monitoring the status of the dew point, the temperature of the scrubbers and the generator, and the pressure of the air outlet.

T701H

30 LPM a 30 PSI

Ultra-pure zero air generator. Ideal for calibrating ultra-low range analyzers in applications for measuring traces of pollutants. It includes a dew point sensor, an oil-less pump and scrubbers of SO2, NO, NO2, O3, SH2, NH3, CO and hydrocarbon. The regenerative dryer produces dew points up to -40°C. Its Modbus TCP/IP output can monitor the status of the dew point, the temperature of the eliminators and the generator and the pressure of the air outlet.

T751H

0-10 LPM a 30 PSI

The portable ultra-pure zero air generator is ideal for calibrating ultra-low range analyzers in applications for measuring the bottom and traces of pollutants. It includes a dew point sensor, an oil-less pump and scrubbers of SO2, NO, NO2, O3, SH2, NH3, CO and hydrocarbon. The regenerative dryer produces dew points up to -20°C. Its internal tank guarantees the absence of "pulses" in the generation of air. Heating time: less than 30 minutes.