en
Phone +34 985 73 39 52

WATER QUALITY METERS

Aqualabo

We are official distributors and technical service for Aqualabo products to monitor water quality in Spain, Portugal and Andorra.

Aqualabo sensors are professional instruments for measuring water quality and are specifically designed to measure parameters such as Turbidity, Conductivity/Salinity, Total Suspended Solids (TSS) and Dissolved Solids (TDS), pH, Redox (ORP) and Dissolved Oxygen.

Multiparameter probes are also available for analysis of several parameters and pollutants in a single device. Water quality samplers allow water samples to be collected from various sources for analysis and evaluation.

DIGITAL PROBES FOR MONITORING PHYSICAL PARAMETERS

Turbidimeters are water quality measurement and analysis instruments that determine the amount of suspended particles in water that affect visual clarity. These particles can include sediment, clay, organic matter and other suspended solids.

Water conductivity and salinity probes or meters are based on the ability of water to conduct electricity and are related to the presence of dissolved ions in water such as ionic contaminants (minerals, acids or bases) or inorganic contaminants such as dissolved heavy metals in municipal wastewater treatment, industrial wastewater treatment, surface water monitoring, seawater and drinking water.

Total Suspended Solids (TSS) and Sludge Blanket sensors and probes provide valuable information on the particle load in the water and the efficiency of the treatment processes, as an increase in these parameters can indicate problems in the plant, blockages in the equipment or a decrease in treatment efficiency.

DIGITAL SENSOR NTU

Turbidimeter

The NTU sensor integrates low cost optical technology with low maintenance and no consumables. The measurement principle is based on ISO 7027 / 850 nm nephelometry. Available in 3m and 7m sizes.

DIGITAL SENSOR C4E

Conductivity / salinity meter

Digital sensor with 4-electrode technology (2 graphite, 2 platinum) to detect water pollution. Modbus RS-485 protocol. Available in 1m, 3m and 7m lengths.

INDUCTIVE SENSOR CTZN

Conductivity / salinity meter

Smart digital sensor that stores calibration data and history in the sensor. Based on intercoil conductivity technology. Modbus RS-485 protocol. Available in 7m and 15m sizes.

OPTICAL SENSOR MES5 /VB5

TSS meter and sludge blanket

Optical IR sensor based on the attenuation of the IR signal at 870nm through a 5mm optical slit. The sensor provides TSS (g/l), turbidity (FAU) and sludge film measurements in % IR transmittance. Available in 3m, 7m and 15m lengths.

MULTIPARAMETER PROBE

Multiparameter probes are specifically designed to monitor multiple water quality parameters in a single instrument and are very useful in municipal wastewater treatment, industrial effluent, surface water monitoring, fish farming, aquaculture and drinking water.

STACSENSE PROBE

COD, BOD, TOC, Turbidity

The STACSENSE probe uses UV absorption at 254 nm to measure dissolved organic compounds in water. This absorbance correlates with TOC, COD and BOD concentration to provide a high performance probe that requires no consumables.

WATER QUALITY SAMPLING SYSTEM

Water samplers play a key role in the conservation and management of water resources by providing data on the presence and concentration of various parameters and pollutants. They are widely used in industry, agriculture, public health, environmental monitoring, drinking water quality control and scientific research.

AQUIBOX Sampler

Portable sampler

Isothermal sampler with variable capacity from 1 bottle of 6.4L to 12 bottles of 1L. Made of AISI 304 stainless steel and equipped with a battery with a capacity of 600 samples.

AQUIFROID Sampler

Portable sampler

Refrigerated sampler with vacuum pump and variable capacity from 1 bottle of 10.4L to 24 bottles of 1L. Made of AISI 304 stainless steel and equipped with a battery with a capacity of 600 samples.

AQUINOX Sampler

Stationary sampler

Stationary refrigerated sampler for highly accurate quality sampling. Allows the use of specific bottle combinations.

AQUITOP Sampler

Stationary sampler

Isothermal wall-mounted sampler with double dosing, specially designed for environmental sampling.

BABYNOX ECO Sampler

Stationary sampler

Compact unit designed to meet CE - ISO 5667 quality standards, with vacuum pump sampling system for more accurate sampling. It has 9 adjustable programmes and hot and cold air conditioning.

Do you want to request your Quotation?

Send your request
test